Keysight E4981A - Mmemory:load:state[:Register]; Mmemory:store:state[:Register]

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 229
Command Reference
E4981A SCPI Commands
:MMEMory:LOAD:STATe[:REGister]
Syntax :MMEMory:LOAD:STATe[:REGister] <numeric>
Description Loads the state from the memories. Numbers 0 to 9 are located in the internal
memory, while No. 10 to 19 are situated in the external USB memory. (No
Query)
Parameter
Equivalent key [Save/Recall] - No {1-9} - RECALL
:MMEMory:STORe:STATe[:REGister]
Syntax :MMEMory:STORe:STATe[:REGister] <numeric>
Description Stores the state to the memories. Numbers 0 to 9 are located in the internal
memory, while Nos. 10 to 19 are situated in the external USB memory. Number
9 is automatically recalled. (No Query)
Parameter
Equivalent key [Save/Recall] - No {1-9} - SAVE
<Numeric>
Range 0 to 19
Resolution 1
<Numeric>
Range 0 to 19
Resolution 1