Keysight E4981A - System:beeper:tone

274 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:SYSTem:BEEPer:TONE
Syntax :SYSTem:BEEPer:TONE <numeric>
:SYSTem:BEEPer:TONE?
Description Selects the beep sound tone.
Parameter
Query response {1|2|3|4|5}<newline><^END>
Equivalent key [System] - SYSTEM CONFIG - BEEPER TONE -
TONE1|TONE2|TONE3|TONE4|TONE5
<Numeric>
Range 1 to 5
Initial (Factory set) value 3
Resolution 1
The value of this command is not changed with *RST and :SYSTem:PRESet
and is only changed with Factory Default reset (available only through
Front Panel).