Keysight E4981A - Data:feed:control:buf1[:State]

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 197
Command Reference
E4981A SCPI Commands
:DATA:FEED:CONTrol:BUF1[:STATe]
Syntax :DATA:FEED:CONTrol:BUF1[:STATe] {NEVer|ALWays}
:DATA:FEED:CONTrol:BUF1[:STATe]?
Description Determines whether the measurement data is fed into data buffer 1 never or
always.
Parameters
Query response {NEV|ALW}<newline><^END>
Related commands :DATA:FEED:BUF1 on page 195
:DATA:POINts:BUF1 on page 202
Equivalent key
sequence
[Save/Recall] - CATALOG - SAVE DATA - START LOG
Description
ALWays Feeds the measurement data into the data buffer 1 specified by
BUF1 each time a measurement is performed.
NEVer (initial
value)
Does not feed the measurement data into the data buffer 1
specified with BUF1.