Keysight E4981A - Calculate3:Math:state; Calculate4:Math:state

194 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
:CALCulate3:MATH:STATe
Syntax :CALCulate3:MATH:STATe {ON|OFF|1|0}
:CALCulate3:MATH:STATe?
Description This is a dummy command for 4268A/4288A compatibility. The current monitor
function is always set to ON in E4981A. The query response is always 1.
Query response {1}<newline><^END>
Related commands :CALCulate4:MATH:STATe on page 194
Equivalent key
sequence
No equivalent key is available on the front panel.
:CALCulate4:MATH:STATe
Syntax :CALCulate4:MATH:STATe {ON|OFF|1|0}
:CALCulate4:MATH:STATe?
Description This is a dummy command for 4268A/4288A compatibility. The voltage
monitor function is always set to ON in E4981A. The query response is always
1.
Query response {1}<newline><^END>
Related commands :CALCulate3:MATH:STATe on page 194
Equivalent key
sequence
No equivalent key is available on the front panel.