Keysight E4981A - [:Sense]:Correction:ckit:stan2:Format

234 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
E4981A SCPI Commands
10-
[:SENSe]:CORRection:CKIT:STAN2:FORMat
Syntax [:SENSe]:CORRection:CKIT:STAN2:FORMat {RX|LSRS}
[:SENSe]:CORRection:CKIT:STAN2:FORMat?
Description Sets the parameter types of the SHORT correction data.
Parameters
Query response {RX|LSRS}<newline><^END>
Related commands [:SENSe]:CORRection:DATA on page 240
Equivalent key
sequence
[Meas Setup] - CORRECTION - SHORT- R-X/Ls-Rs
Description
RX (initial value) Specifies R as the primary parameter and X as the secondary
parameter.
LSRS Specifies Ls as the primary parameter and Rs as the secondary
parameter.