Keysight E4981A - Calculate1:Comparator:count:multiple:data

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 177
Command Reference
E4981A SCPI Commands
:CALCulate1:COMParator:COUNt:MULTiple:DATA?
Syntax :CALCulate1:COMParator:COUNt:MULTiple:DATA?
Description Reads out each count value of BIN1 to BIN9, OUT_OF_BINS, and AUX_BIN of
the selected channel.
When the multi-correction function is turned off, reads out normal count
values (common value for all channels). In other words, this command has the
same function as the :CALCulate1:COMParator:COUNt:DATA? command.
Reads out all BIN count values regardless of the ON/OFF state of each BIN (set
with the :CALCulate1:COMParator:PRIMary:BIN{1-9}:STATe command).
(Query only)
Parameters
Query response {numeric 1},…,{numeric 11}<newline><^END>
Description
{numeric 1} The count value of BIN1 of selected channel.
{numeric 2} The count value of BIN2 of selected channel.
{numeric 3} The count value of BIN3 of selected channel.
{numeric 4} The count value of BIN4 of selected channel.
{numeric 5} The count value of BIN5 of selected channel.
{numeric 6} The count value of BIN6 of selected channel.
{numeric 7} The count value of BIN7 of selected channel.
{numeric 8} The count value of BIN8 of selected channel.
{numeric 9} The count value of BIN9 of selected channel.
{numeric 10} The count value of OUT_OF_BINS of selected channel.
{numeric 11} The count value of AUX_BIN of selected channel.