160 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
IEEE Common Commands
10-
*RCL
Syntax *RCL <numeric>
Description Recalls the instrument setups saved in the register of the specified number on
Flash (internal) memory or USB pen drive (external memory). For details of
recalled instrument setups, refer to Operation Manual, Appendix C “Initial
Setting”.(No query)
Parameters
If the specified parameter is out of the allowable setup range, an error occurs.
Related commands *SAV on page 161
Equivalent key
sequence
[Save/Recall] - No {1-9} - RECALL
*RST
Syntax *RST
Description Resets the instrument to the preset state.
The preset state is different from that when resetting is done using the
:SYSTem:PRESet command. For details, refer to Operation Manual, Appendix
C “Initial Setting” (No query)
Related commands :SYSTem:PRESet on page 284
:INITiate:CONTinuous on page 227
Equivalent key
sequence
No equivalent key is available on the front panel.
<numeric>
Description Specified number
Range 0 to 9 (Internal Flash Memory)
10 to 19 (External USB Memory)
Resolution 1
To Next Page
Loading...
