22 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Overview of Remote Control
LAN Remote Control System
2-
Required equipment
1. E4981A
2. External controller (personal computer or workstation that can be
connected to a LAN and with Keysight I/O Libraries Suite installed)
3. Other devices (other instruments and/or peripherals that serve your
purpose)
4. LAN cable for connecting the E4981A with the external controller
Preparing the E4981A
Before controlling the E4981A via a LAN, you need to configure the network
function. For detailed information on the procedure, refer to Operation Manual.
Control over SICL-LAN server
In a control system using the SICL-LAN server, communication between the
external controller (client) and the E4981A (server) is performed using the
SICL-LAN protocol. Communication is performed using SICL (Standard
Instrument Control Library). You can control the E4981A by programming using
SICL or VISA in C language in a UNIX environment, or Visual C++, Visual Basic,
or VEE in a Windows environment.
In E4981A, SICL-LAN (VXI-11) value cannot be set to OFF.
To Next Page
Loading...
