314 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Command Reference
SCPI Command Table
10-
Others Executes self-test (Dummy command for 4268A/4288A
compatibility)
*TST? on page 163
Readout of the model name and firmware version *IDN? on page 158
Readout of the installed option number *OPT? on page 159
Reads 1 when operation completes *OPC? on page 159
Readout of the occurred error information :SYSTem:ERRor[:NEXT]? on page 280
Waits for completion of operation *WAI on page 163
Reset :SYSTem:RESTart on page 284
LEARN *LRN? on page 158
Handler interface
signal control
BIN :TEST:HANDler:BIN on page 288
COMP :TEST:HANDler:COMP on page 289
OVLD :TEST:HANDler:STATus:OVLD on page 295
No_Cont/Low_C :TEST:HANDler:STATus:NC on page 294
Alarm :TEST:HANDler:STATus:ALARm on page 291
Index :TEST:HANDler:STATus:INDex on page 293
EOM :TEST:HANDler:STATus:EOM on page 292
Ready for trigger :TEST:HANDler:STATus:RDYTrig on page 296
Trigger :TEST:HANDler:TRIGger? on page 297
Key Lock :TEST:HANDler:KEYLock? on page 289
Voltage setting for input trigger :SYSTem:HANDler:TRIGger:VOLTage on page 282
Scanner interface
signal control
EOM :TEST:SCANner:EOM on page 299
Index :TEST:SCANner:INDex on page 300
Channel :TEST:SCANner:CH? on page 298
Channel Valid :TEST:SCANner:VALid? on page 302
Trigger :TEST:SCANner:TRIGger? on page 302
Voltage setting for input trigger :SYSTem:SCANner:TRIGger:VOLTage on page 285
Rear Trigger Trigger :TEST:REAR:TRIGger? on page 297
Table 10-1 SCPI command table
Function Item to Be Set Up/Executed SCPI Command
To Next Page
Loading...
