Keysight E4981A - 7. Sorting Based on Measured Results (Comparator Function); Comparator Functionality and Setup

36 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Overview of Remote Control
USB Remote Control System
2-
Control using C or Visual Basic
You can control the E4981A by programming using SICL/VISA with Visual C++
or Visual Basic in a Windows environment. For further information on
controlling the E4981A, see the manual for SICL or VISA. For Keysight I/O
Libraries Suite, use Keysight I/O Libraries Suite 15.
You may employ aliases in programming using SICL/VISA.
The following example shows an OPEN command to control the E4981A, for
which the alias is E4981A_USBIF.
Control using Keysight VEE
Keysight VEE allows you to control the E4981A via the direct I/O interface. The
following example shows how to control the E4981A, for which alias is given as
E4981A_USBIF.
Step 1. On the Keysight VEE's I/O menu, click Instrument Manager...
Step 2. In the Instrument Manager setting screen, click the Add Instruments icon and
in the Add Interface/Device screen select USB.
SICL id = iopen ("E4981A_USBIF")
VISA viOpen (...,"E4981A_USBIF",...)
For further details on the programming using SICL/VISA, see the SICL
Users Guide or the VISA Users Guide.
When using Keysight VEE for PCs, use Keysight VEE Pro 7 for Windows or a
later version.