376 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Error Messages
Error Messages (Order of Error Number)
-
48 REF measurement incomplete
This error occurs when the cable correction REF measurement is incomplete.
82 Store failed
This error occurs when external mass storage device fails or internal FLASH
ROM hardware fails.
Contact Keysight Technology’s Sales and Service Office or the company from
which you purchased the device.
83 No data to load
There is no setup data for the selected number or no external mass storage
device is connected.
1070 Fan failed
Cooling fan hardware failure is detected.
Contact Keysight Technology’s Sales and Service Office or the company from
which you purchased the device.
1080 Power failed
Power unit hardware failure is detected.
Contact Keysight Technology’s Sales and Service Office or the company from
which you purchased the device.
1103 A1 EEPROM write error
An error is generated while writing data to A1 EEPROM.
Contact Keysight Technology’s Sales and Service Office or the company from
which you purchased the device.
1200 CPU bd FLASH ROM write error
An error is generated while writing data to FLASH.
Contact Keysight Technology’s Sales and Service Office or the company from
which you purchased the device.
1201 CPU bd EEPROM write error
An error is generated while writing data to EEPROM.
Contact Keysight Technology’s Sales and Service Office or the company from
which you purchased the device.
-100 Command error
A comprehensive syntax error has occurred for which the E4981A cannot
detect further details of the error. This error code simply indicates the
occurrence of a command error that is defined in IEEE488.2,11.5.1.1.4.
To Next Page
Loading...
