2-10 Service Manual
4023-001
Remove Paper All
Output Bins
Remove paper. Check exit full sensor for
designated device and bin.
Replace Fuser The fuser page counter
has exceeded the fuser
page limit.
Replace fuser mmkit.
(customer ordered)
This message will only be
cleared when the fuser
page count has been reset
to zero. See
“Resetting
Fuser Counter” on
page 4-13
.
Replace PC Kit Photoconductor kit is
near-life. If the
photoconductor kit is not
replaced when the
warning is cleared, the
printer repeats this
warning.
Replace PC kit. See
operator manual.
Replace Toner
Cartridge
Toner cartridge is
completely empty. If the
toner cartridge is not
replaced when the
warning is cleared, the
printer repeats this
warning.
Replace toner cartridge.
See operator manual.
Replace Toner/PC The toner cartridge and
the photoconductor kit
have been reported as
near-empty and near-
life. If the
photoconductor kit or
toner cartridge is not
replaced when the
warning is cleared, the
printer repeats the
warning.
Replace toner cartridge
and PC kit. See operator
manual.
Replace Transfer
Kit
The transfer page
counter has exceeded
the transfer page limit.
Replace transfer mmkit
(customer ordered). See
“Resetting Transfer
Counter” on page 4-13
.
Message Description Action
To Next Page
Loading...
