Lexmark Optra W810 - Page 120

2-12 Service Manual
4023-001
Tray 4 Empty
Tray 3 Empty
Tray 2 Empty
Tray 1 Empty
An input tray is out of
media.
Check the tray (cassette
empty sensor and
actuators) and connectors.
• Tray 4–PPS1, PPS2
• Tray 3–PC22
• Tray 2–PC22
• Tray 1–PC4
Replace as necessary.
Replace the printer main
engine board (PWB-A) if
necessary.
Std Bin Full
Bin 1 Full
Bin 2 Full
Bin 3 Full
Bin 4 Full
Bin 5 Full
Bin 6 Full
Bin 7 Full
Bin 8 Full
Bin 9 Full
Bin 10 Full
A bin is full. The bin full
warning is cleared when
the output level reported
by the bin is no longer
full. This warning is only
available when the
configure bins setting is
set to Mailbox.
Check the tray/bin full
sensor and actuators.
• Finisher standard bin–
PC12
• Mailbox standard bin–
PWB-B
• Bin1–PWB-D1
• Bin2–PWB-D2
• Bin3–PWB-D3
• Bin4–PWB-D4
• Bin5–PWB-D5
• Bin6–PWB-D6
• Bin7–PWB-D7
• Bin8–PWB-D8
• Bin9–PWB-D9
• Bin10–PWB-C
Tray 4 Low
Tray 3 Low
Tray 2 Low
Tray 1 Low
An input tray is low on
media. The tray warning
is cleared when the
associated tray is
removed.
Check the tray low
sensors, actuators and
connectors. Replace as
necessary.
• Tray 4–RS1, RS2
• Tray 3–PC25
• Tray 2–PC25
• Tray 1–PC5
Replace the printer main
engine board (PWB-A) if
necessary.
Message Description Action