Section
Summary of Change
Internal Use
Only
• Removed “Elevation ” from the description of New Holland CX
Series.
6.2 FM100 Feed Auger
Configurations, page 178
Medium configuration as an optional configuration: Added
AGCO IDEAL
™
Series.
Engineering
6.2 FM100 Feed Auger
Configurations, page 178
Medium configuration: Added information about the quantity of
flightings and fingers.
Tech Pubs
6.2 FM100 Feed Auger
Configurations, page 178
Wide configuration:
• Added information about the quantity of flightings and
fingers.
• Removed NOTE referring to "Optional Modification to Wide
Configuration."
Tech Pubs
6.2 FM100 Feed Auger
Configurations, page 178
Ultra narrow configuration:
• Added information about the quantity of flightings and
fingers.
• Added NOTE about drilling holes.
Tech Pubs
Product Support
6.2 FM100 Feed Auger
Configurations, page 178
Ultra wide configuration: Added this configuration.
Tech Pubs
6.2.1 Converting from Ultra
Narrow Configuration or Narrow
Configuration to Medium
Configuration, page 181
Removed footnote:
• MD #287031 contains wear-resistant flightings, and is
available only through MacDon Parts.
Tech Pubs
6.2.1 Converting from Ultra
Narrow Configuration or Narrow
Configuration to Medium
Configuration, page 181
• Step 5, page 182
• Step 7, page 182
• Added NOTE.
• Removed NOTE: Flightings are NOT included in this kit. Order
flighting kits (MD #287031) separately.
Tech Pubs
6.2.1 Converting from Ultra
Narrow Configuration or Narrow
Configuration to Medium
Configuration, page 181
• Step 9, page 183
Added to step:
• Removing the long flightings left empty flighting slots in the
auger that were not needed to install the new shorter
flightings.
Tech Pubs
6.2.2 Converting from Wide
Configuration to Medium
Configuration, page 183
Removed footnote:
• MD #287031 contains wear-resistant flightings, and is
available only through MacDon Parts.
Tech Pubs
6.2.2 Converting from Wide
Configuration to Medium
Configuration, page 183
• Step 4, page 184
• Step 6, page 184
Added NOTE. Tech Pubs
215184 v Revision A
To Next Page
Loading...
