Matrix ETERNITY NE System Manual 1031
Response Mapping
All SIP messages are either requests from a server or a client, or responses to a request. For calls to be
established in a SIP network, the mapping of system disconnect/release events to that of SIP codes and events
and vice-versa is very important.
SARVAM UCS supports configurable System to SIP Cause Mapping. You can select the code and event the
system must send as the SIP response to remote SIP Peer, when the system disconnect/release the SIP call.
How to configure
• Login as System Engineer.
• Under Advanced Settings, click Response Mapping.
• Click System to SIP cause mapping.
• Select the SIP cause for each system disconnect/release cause that you want the system to send as the
SIP response to the remote SIP Peer.
• Click Submit.
To Next Page
Loading...
