Matrix Telecom ETERNITY NE - Technical Specifications of ETERNITY NENX

Matrix ETERNITY NE System Manual 17
Technical Specifications of ETERNITY NENX
This section enlists the technical specifications and other essential information of all the variants of ETERNITY
NENX.
Specifications ETERNITY NENXIP50 ETERNITY NENX312 ETERNITY NENX416
Application SARVAM UCS SOHO
CO Lines 4 3 4
Single Line Telephones 2 12 16
SIP Trunks 8 8 8
ETERNITY NE VS (VoIP
Server Module)
a
a.By default, the VoIP module is factory fitted in ETERNITY NENXIP50. However, it is an optional module
in ETERNITY NENX312 and ETERNITY NENX416. You must purchase the VoIP module to register and
configure the SIP Extensions.
1 1 1
SIP Extensions
b
b.By default, ETERNITY NENXIP50 supports registration and configuration of 50 SIP Extensions and ETER-
NITY NENX312 and ETERNITY NENX416 supports registration and configuration of 10 SIP Extensions only.
To configure and register additional SIP Extensions, you need to purchase and activate the IP Subscriber
license as per your requirement. To know about IP Subscriber license, refer to “License Management”.
* It is an optional module.
** It is an optional module, requires license activation.
To know other technical details of ETERNITY NENX, refer to “Appendix”.
50 50 50
GSM/UMTS/LTE Trunks*
222
Voice Mail Channels 4 Channels 4 Channels 4 Channels
VoIP Channels 8 Channels 8 Channels 8 Channels
Maximum IP to IP Call 25 25 25
Maximum IP to TDM Call 8 8 8
Ethernet (RJ45) Port Auto MDIX (10/100 Base-T)
Voice Mail System** Pen drive (factory-fitted)