208 Matrix ETERNITY NE System Manual
Configuring MATRIX VARTA WIN200 UC Client
MATRIX VARTA WIN200, is a SIP (Session Initiation Protocol) based Unified Communication Client running on
Windows OS, delivering full-array of the System features to the user on-the-go along with an added advantage of
video calling. Through tight integration with the enterprise features of the System, UC Client provides advance call
capabilities including Conferencing, Corporate Directory Access (Global Directory), Call Logs and Conversation
Recording with one-touch access. Other than these you can take the advantage of using premium features like
Presence subscription and notification, Corporate Voicemail access to enhance your overall mobile experience. To
know the list of featured supported, refer to “SARVAM UCS Features supported in Terminals”.
To use MATRIX VARTA WIN200 make sure you have:
• Purchased and activated the VARTA Essential or VARTA Professional license. For more details, see
“License Management”.
• Assigned the desired license to the SIP Extension. For more details, see “VARTA License Management”.
For detailed product information and operation instructions, refer to the MATRIX VARTA WIN200 User Guide.
Configuring MATRIX VARTA WIN200 using Jeeves
To be able to register and use the MATRIX VARTA WIN200 for Windows - Desktop Client, you must configure the
following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• Matrix Extended Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”.
Configuring Matrix Extended Phone Settings using Jeeves
You can register three Matrix Extended Phones/Soft Clients at three different locations as a single SIP Extension.
You can connect the same or different types of Extended Phones/Soft Clients — SPARSH VP248, SPARSH
VP310, SPARSH VP510, SPARSH VP330, Matrix Extended SPARSH VP710, Matrix VARTA UC Clients or
MATRIX VARTA WIN200 Desktop UC Client — at each location. In this case we assume that MATRIX VARTA
WIN200 UC Client is registered at Location 1, 2 and 3.
If you want to use more than one MATRIX VARTA WIN200 for Windows - Desktop Client as a SIP Extension,
configure their settings as Location 1, Location 2 and Location 3.
If you want to use the IM functionality in the UC Client, you must configure it at Location-1 only.
If you have connected Matrix SPARSH VP248, refer to “Configuring Matrix SPARSH VP248”.
If you have connected Matrix SPARSH VP310, refer to “Configuring Matrix SPARSH VP310”.
If you have connected SPARSH VP510 at any of the locations, refer to “Configuring Matrix SPARSH VP510”.
If you have connected Matrix SPARSH VP330, refer to “Configuring Matrix SPARSH VP330”.
If you have connected Extended SPARSH VP710 at any of the locations, refer to “Configuring Matrix Extended
SPARSH VP710”.
If you have registered Matrix VARTA ADR100 and VARTA AMP100 Mobile UC Clients in any of the locations, refer
to “Configuring Matrix VARTA ADR100/AMP100 UC Clients”.
To Next Page
