266 Matrix ETERNITY NE System Manual
Device Management
SARVAM UCS supports Auto Detection and Auto Provisioning of third party IP Phones as well as Extended
Clients. Device Management is a touch-free, plug and play feature and is an ideal solution for a large deployment of
phones. To use this feature you must plug all the IP phones in same network (recommended) and also make sure
that these phones are registered as SIP Extensions at Device Settings - Location 1 only. The system will support
Auto Detection and provisioning of all these phones (third party IP Phones and Extended Clients).
Once you connect the phones the details will be displayed on the Device Management page.
To use this feature,
• Click Device Management.
• The following information will be displayed for each connected phone:
• Device Name: It displays the name of the phone connected in your LAN.
• MAC Address / Device ID: It displays the MAC or Device ID of the phone.
• IP Address: It displays the IP Address of the phone.
• Last Seen: It displays the date and time, when the system detects the connected phone.
• Assign: If the phone is already configured, it displays the Name, Extension Number and Location
Number. If you wish to edit the details, click on the detail link.
If the device is not configured, it displays ‘Not Assigned’. If you wish to assign an extension to the
phone, click on the Not Assigned link.
A new Assign Extension window opens. Configure the following details to assign an extension to it:
• Select SIP Extension: Select the SIP Extension Number you want to assign to the phone.
• Name: Enter a name for the SIP Extension. You can enter the name of the person using the SIP
Extension or his/her Department name. This name will appear as CLI on the Called Party’s phone,
when a call is made using this SIP Extension.
The name may consist of a maximum of 18 alphanumeric characters.
• SIP ID: Enter the SIP ID for the extension. It is the number which remote parties will use to call this
SIP Extension. SIP ID of each SIP Extension must be a unique number string of a maximum of 6
digits. Any combination of digits from 0 to 9 and the characters * and # are allowed.
You cannot assign the same SIP ID to more than one extension.
• Authentication ID: Enter the Authentication ID for the SIP Extension. You cannot keep this field
blank. Authentication ID is the number which you want the VoIP module's Registrar Server to use
for user authentication of the SIP messages received from this SIP Extension. The number may be
a string of maximum 6 alphanumeric characters. All ASCII characters except < > and “ (double
quote) are allowed.
To Next Page
