760 Matrix ETERNITY NE System Manual
Conference-Multiparty
Like the Dial-In Conference, a Multi-party conference allows speech between more than three participants.
The key difference between Dial-In and Multi-party conference is that in a Dial-In conference participants can
include themselves in the conference by dialing into it without assistance, whereas in a Multi-party Conference the
party initiating the conference must include the participants by dialing their numbers and the Multi-party Conference
feature code.
In a 3-party Conference, when you add the fourth participant, a Multiparty Conference is initiated.
A Multiparty conference may be
• between extensions
• between extensions and trunks, i.e. external numbers.
Any participant in a Multiparty Conference can Include a party, Remove a party, Leave a conference temporarily or
can Cancel a conference. When any participant is included in the conference, the system plays a beep to indicate
the inclusion.
A conference may also include the Operator (Assistant). For confidential discussions, where the parties need to
know that the operator has withdrawn, the system provides facility to play beeps.
Beeps
126
will be played:
• when the operator is present in the conference at regular intervals
• when the operator has left the conference
Extension users can initiate multiparty conference from a remote location using “Direct Inward System Access
(DISA)”.
SARVAM UCS supports 6 participants in a Multi-party Conference. The system supports 2 simultaneous Multi-
party Conferences.
How it works
A, B, C, and D are extension users.
E and F are external numbers.
A decides to hold a teleconference with B, C, D, E and F.
G is the Operator
Initiating a Multiparty Conference
• A has initiated a 3-party conference with B and C.
• A dials the D’s number followed by the 3-party conference code. D is included in the conference.
• If A dials the G’s number followed by the 3-party conference code. G is included in the conference. The
system plays a beep to indicate the inclusion.
Now, the 3-party Conference is converted into a Multiparty Conference.
• The system will play beeps at regular intervals indicating that one of the participants present in the
conference is the Operator (Assistant).
126. The total Beep Time = Beep Cadence + Wait Timer. The Wait Timer(non-programmable) is fixed as 2 seconds by the system.
To Next Page
Loading...
