190 Matrix ETERNITY NE System Manual
Configuring Matrix SPARSH VP510
SPARSH VP510, the Premium IP Phone sets the benchmark for quality performance with elegant design, crystal-
clear voice and feature-rich capabilities at economical price. To know the list of featured supported by Matrix
SPARSH VP510, refer to “SARVAM UCS Features supported in Terminals”.
For instructions on how to use SPARSH VP510, refer to the EON510_SPARSH VP510 User Guide.
To be able to use SPARSH VP510 - Extended IP Phone, you must configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• Extended IP Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”.
Configuring Matrix Extended Phone Settings using Jeeves
You can register three Matrix Extended IP Phones/Soft Clients at three different locations as a single SIP
Extension. You can connect/register the same or different types of Extended Phones/Soft Clients —SPARSH
VP248, SPARSH VP310, SPARSH VP510, SPARSH VP330, Matrix Extended SPARSH VP710, Matrix VARTA UC
Clients or MATRIX VARTA WIN200 Desktop UC Client — at each location. In this case we assume that SPARSH
VP510 is connected at Location 1, 2 and 3.
If you want to use more than one SPARSH VP510 Extended IP Phones as a SIP Extension, configure their settings
as Location 1, Location 2 and Location 3.
If you have connected SPARSH VP248 at any of the locations, refer to “Configuring Matrix SPARSH VP248”.
If you have connected SPARSH VP310 at any of the locations, refer to “Configuring Matrix SPARSH VP310”.
If you have connected SPARSH VP330 at any of the locations, refer to “Configuring Matrix SPARSH VP330”.
If you have connected Extended SPARSH VP710 at any of the locations, refer to “Configuring Matrix Extended
SPARSH VP710”.
If you have registered Matrix VARTA ADR100 and VARTA AMP100 Mobile UC Clients in any of the locations, refer
to “Configuring Matrix VARTA ADR100/AMP100 UC Clients”.
If you have registered MATRIX VARTA WIN200 UC Client in any of the locations, refer to “Configuring MATRIX
VARTA WIN200 UC Client”.
• Click Device Settings - Location 1 to expand.
To Next Page
Loading...
