Matrix Telecom ETERNITY NE - Configuring Matrix SPARSH VP310

Matrix ETERNITY NE System Manual 171
Configuring Matrix SPARSH VP310
SPARSH VP310, the Executive IP Phone is engineered to offer a contemporary design with crystal-clear audio and
feature-rich capabilities at economical price. It functions like SPARSH VP248, the proprietary SIP-based IP Phone
for SARVAM UCS, of Matrix. To know the list of features supported by Matrix SPARSH VP310, refer to “SARVAM
UCS Features supported in Terminals”.
For instructions on how to use SPARSH VP310, refer to the common EON48_310_SPARSH VP248_310 User
Guide.
To be able to use SPARSH VP310 - Extended IP Phone, you must configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• Extended IP Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”.
Configuring Matrix Extended Phone Settings using Jeeves
You can register three Matrix Extended IP Phones/Soft Clients at three different locations as a single SIP
Extension. You can connect/register the same or different types of Extended Phones—SPARSH VP248, SPARSH
VP310, SPARSH VP510, SPARSH VP330, Matrix Extended SPARSH VP710, Matrix VARTA UC Clients or
MATRIX VARTA WIN200 Desktop UC Client — at each location. In this case we assume that SPARSH VP310 is
connected at Location 1, 2 and 3.
If you want to use more than one SPARSH VP310 Extended IP Phones as a SIP Extension, configure their settings
as Location 1, Location 2 and Location 3.
If you have connected SPARSH VP248 at any of the locations, refer to “Configuring Matrix SPARSH VP248”.
If you have connected SPARSH VP510 at any of the locations, refer to “Configuring Matrix SPARSH VP510”.
If you have connected SPARSH VP330 at any of the locations, refer to “Configuring Matrix SPARSH VP330”.
If you have connected Extended SPARSH VP710 at any of the locations, refer to “Configuring Matrix Extended
SPARSH VP710”.
If you have registered Matrix VARTA ADR100 and VARTA AMP100 Mobile UC Clients in any of the locations, refer
to “Configuring Matrix VARTA ADR100/AMP100 UC Clients”.
If you have registered MATRIX VARTA WIN200 UC Client in any of the locations, refer to “Configuring MATRIX
VARTA WIN200 UC Client”.
• Click Device Settings - Location 1 to expand.