Matrix ETERNITY NE System Manual 817
Direct Station Selection Console
The Direct Station Selection (DSS) Console (DSS532) is an add-on module with tri-color LEDs for SPARSH
VP510. It provides you quick access to Stations, Trunks, Features/Functions of SARVAM UCS; also making calling
operations easy.
While the DSS Console is generally used by the Operator/receptionist in an organization, it is also meant to be
used by anyone who needs to access various features of SARVAM UCS at a touch of a single key.
You can attach up to four DSS532 to SPARSH VP510, connected with SARVAM UCS.
DSS532
A maximum of four DSS532 can be attached to SPARSH VP510. With each DSS532, 32 additional keys are at
your disposal to be used as DSS keys. Similarly, if four DSS532 are attached, 128 additional keys can be used as
DSS keys.
For instructions:
• to install the DSS532 with SPARSH VP510, see “Installing DSS532 with SPARSH VP510”.
• to configure the DSS keys of the Console connected to a SPARSH VP510, see “DSS Key Settings” under
“Configuring Matrix SPARSH VP510”.
DSS Keys
You can assign Extension numbers or features/functions to the keys on the DSS Console, so that they can be
accessed easily simply by pressing a single key.
LEDs
Each DSS Key is equipped with an LED which glows to indicate the status of the Trunk/Extension or Feature
assigned to it.
Status of Extensions and Trunks
The LED of DSS keys assigned to Extensions/Trunks glow in three colors to indicate status of the call event on the
Extensions/Trunks and on the phone.
To Next Page
