Matrix Telecom ETERNITY NE - SARVAM UCS Features Supported with Rtp;Direct RTP

1322 Matrix ETERNITY NE System Manual
SARVAM UCS Features supported with RTP/Direct RTP
SARVAM UCS features that use DSP Channels
If RTP mode is set as RTP Relay or Direct RTP, system will use DSP channels for the following features:
• Call Taping
•DISA Call
•Voice Mail
•DID
• Trunk Auto Answer
SARVAM UCS features that use DSP channels when accessed from
Extended IP Phones
If Extended IP Phones are connected as SIP Extensions and the RTP mode is set as RTP Relay or Direct RTP,
system will use DSP channels for the following features:
• Conference
• Raid
• Interrupt Request
• Barge-In
• Conversation Recording
• Paging
SARVAM UCS features supported on Open SIP Clients
If Open SIP Phones are connected as SIP Extensions and the RTP mode is set as RTP Relay or Direct RTP, users
can make internal calls, external calls as well as access the following features and facilities of SARVAM UCS:
• Abbreviated Dialing (both Personal and Global)
• Call Taping
• CUG Calling
• Operator
•Voice Mail
• Emergency Number
Features that need to be handled locally by Open SIP Clients:
• Hold
• Transfer
• Conference
• Call Toggle