Matrix Telecom ETERNITY NE - Installing ETERNITY NENX; Preparing for Installation

Matrix ETERNITY NE System Manual 19
CHAPTER 3 Installing ETERNITY NENX
Preparing for Installation
Before you begin the installation of ETERNITY NENX, make sure you have the following items ready:
• A suitable location to install ETERNITY NENX.
• Necessary telecom wiring in place, with wall jacks for extension lines at the required locations.
• Standard, good quality, twisted pair telephone cables with RJ11 plug.
• A dedicated Power supply outlet close to the system.
• For the SLT ports, arrange for as many standard analog telephone instruments as required to connect as
SLT extensions. You may select any standard telephone instrument like rotary phone, Pulse/Tone
switchable push-button phone, Feature phone or Cordless phone.
• A fax machine, as required, to connect to SLT port.
• For the CO ports, arrange for one or more active Analog, two-wire trunk lines, as required.
• For the Mobile ports, a SIM Card to test mobile network connectivity, if GSM/UMTS/LTE module is
present.
• SIP Account information to be configured in the system to test SIP calls.
• Any standard SIP Phone or Matrix Extended IP Phone to register as SIP Extension of ETERNITY NENX,
if required.
• Insert the Pen Drive provided with the system. Keep the License Voucher ready (you need to purchase this
from Matrix/Dealer), if you wish to use the Voice Mail System (VMS).
• A standalone computer or a computer connected in LAN to access Jeeves, the web-based configuration
tool of ETERNITY NENX.
You will be able to use the VoIP interface only if the system is connected to the LAN network.
Installation Site
ETERNITY NENX may be mounted on a table or on the wall. Select an appropriate site to install ETERNITY NENX
taking into consideration the following recommendations and precautions: