778 Matrix ETERNITY NE System Manual
COSEC Integration
SARVAM UCS supports integration with COSEC to support Matrix COSEC Door Controllers. These door
controllers can be used in VIP Apartments and Villas, wherein ETERNITY NENX is installed.
With this integration the users — SLT, Extended IP— of SARVAM UCS can unlock the COSEC Door Controller.
Matrix COSEC is an enterprise-grade people mobility management solution for organizations covering Time-
Attendance, Access Control, Visitor Management, Employee Self Service Portal, Roster Management, Contract
Workers Management and Cafeteria Management. To know more about Matrix COSEC, refer to COSEC
documentation or visit our website: www.MatrixComSec.com
.
How it works
• Group together extensions of SARVAM UCS that need to access the same COSEC Door Controller.
Assign a Group ID to each group. You can create 50 groups. Each group must have a unique Group ID.
• In SARVAM UCS for integration a User Name and Password is configured. Make sure the same User
Name and Password is configured in each COSEC Door Controller you have installed. You can integrate
50 such Door Controllers with SARVAM UCS.
• Each COSEC Door Controller has a unique IP Address and port.
• Each Group ID is mapped to the IP Address and Port of the COSEC Door Controller. The extensions in the
same Group ID can only unlock the COSEC Door mapped with their Group ID.
• The extension users can open the door by dialing *7 (access code to unlock the COSEC Door,
programmable, see “Access Codes”)or by pressing the DSS key assigned to COSEC Door Open.
Open SIP Phone users can put a call on hold by dialing #2. These users can also unlock the COSEC Door
by dialing *7.
How to configure
• Login as System Engineer.
To Next Page
