Matrix Telecom ETERNITY NE - Station Message Detail Recording-Report

1072 Matrix ETERNITY NE System Manual
Station Message Detail Recording–Report
SARVAMUCS can generate SMDR reports in two modes:
• Online: as and when a call is made or received (see “Station Message Detail Recording–Online”).
Or
• Offline: whenever required, the records of calls stored in the buffer can be printed.
Generation of call record reports offline, is called SMDR - Report.
You can generate SMDR Report, either
• Manually: The report is generated whenever you want.
Or
• As per Schedule: The report is generated on a preset Day, Date and Time.
SARVAM UCS allows you to set a variety of filters for printing SMDR Reports.
SARVAM UCS supports Syslog
155
Client for SMDR. The Syslog Client enables the system to send call records in
syslog format to the remote ‘Syslog Server’. You can view the call records on the remote server and print.
SARVAM UCS supports SMDR only on TCP.
How to configure
To be able to generate SMDR -Report, you must do the following:
• Enable SMDR Storage in the SMDR buffer. See “Station Message Detail Recording–Storage”.
• Assign the Syslog Server IP address as Destination address for Incoming, Outgoing and Internal calls.
To configure SMDR-Report,
• Login as System Engineer.
• Under Advanced Settings, click SMDR.
155. Syslog is one of the protocols used extensively for sending debug messages, and is defined in RFC 3164.