Matrix ETERNITY NE System Manual 669
Call Cost Display
If your extension is a Extended IP Phone, you can use the Call Cost Display feature to view the cost of the last 10
external calls made from your extension.
The system will display the dialed numbers and the call cost for each number that it has calculated on the LCD of
your phone.
How to configure
For this feature to work, it must be enabled on the extension by the System Administrator (SA).
To enable 'Call Cost Display' for an extension:
• Enter SA mode.
• Dial command 1072-181-Extension-Flag
Where,
Extension is the Number of the Extended IP Phone
Flag is
0 for Disable
1 for Enable
By default Call Cost Display is enabled.
• Exit SA mode.
How to use
For Extended IP Phone Users Only
• Press the DSS Key assigned to Call Cost Display feature.
OR
• Dial 1075.
• Scroll with the up/down navigation keys to view the cost of the last 10 calls.
• The display shows the last 10 dialed numbers and their corresponding call cost.
For example: If the call charge is for the dialed number 0014034545247 is $2 and 80 cents, the display will
show the number as:
• The display is retained till the extension remains OFF-Hook.
•Go Idle.
0014034545247 2.80
Fri 22 JAN 12:19
To Next Page
Loading...
