908 Matrix ETERNITY NE System Manual
Holiday Table
The Holiday Table feature of SARVAM UCS enables you to configure incoming call management for holidays.
Using the Holiday Table feature of SARVAM UCS you can,
• define the landing destination for incoming calls on trunks on holidays.
• greet callers with customized holiday messages.
• determine the way extensions must work on the holidays.
You can configure a list of holidays in a single table.
How it works
In the Holiday Table, you need define the following:
• The Start and the End Dates and the Time to be considered as Holiday.
• The Time Zone to be considered for operating the time-zone based trunk and extension features during
the Date and Time configured as Holiday. The Time Zone for Holiday can be defined as Non-Working
Hours, Working Hours or As per Time Table.
If you are using the Voice Mail Auto Attendant as the landing destination for calls, on holidays, you can play
customized greeting messages to callers. For each holiday, you can play a different message.
For example, A company, ABC Ltd., has the following requirements:
• December 23 to December 31, all the employees will be on a holiday. The callers must be greeted with a
holiday message.
• January 1 to January 4, few employees will be attending the office.
In this case you must define the following in the Holiday Table:
At Index 1,
•In Start, enter the starting date and time of the holiday in DD-MMM-HH-MM format, that is 23 DEC, 00:00
and in End enter the last date and time of the holiday, that is 31 DEC, 23:59.
•In Time Zone for Holiday, select Non-working hours.
•In Holiday Message select the customized holiday message number. The system will greet the callers
with this message.
At Index 2,
•In Start, enter the starting date and time of the holiday in DD-MMM-HH-MM format, that is 31 DEC, 00:00
and in End enter the last date and time of the holiday, that is 4 JAN 23:59.
•In Time Zone for Holiday, select As per Time Table.
To Next Page
