Matrix ETERNITY NE System Manual 507
VMS Debug
The VMS supports debug for the VMS Application and SMTP. You can view debug messages on the Syslog
Server
91
.
To be able to use Syslog for debug, you will need to configure the Syslog Server Address and the Server Port on
which Syslog will listen for the debug messages.
How to configure
• Login as System Engineer.
• Under Advanced Settings, click VMS Configuration.
• Click Debug.
• Select the Enable Debug check box if you wish to view the VMS Debug.
•In Syslog Server IP Address, configure the IP Address of the Syslog Server.
91. SARVAM UCS supports Syslog Client, which enables the VMS to send debug messages in syslog format to the remote 'Syslog
Server' on the IP network. You can view the system debug messages on the remote Syslog server or any other application which
can capture the Syslog debug messages.
To Next Page
