Matrix ETERNITY NE System Manual 1019
Quick Dial
Quick Dial provides Extended IP Phone users, the facility of ‘One-touch’ dialing of numbers stored in their Personal
Directory and the Global Directory.
How it works
Quick Dial is based on “Abbreviated Dialing”.
To be able to Quick Dial a number,
• The number must exist in the Personal or Global Directory assigned to the extension.
• Personal and Global Directory dialing must be allowed in the Class of Service of the extension.
• On the Extended IP Phones, DSS keys must be configured with the Short Codes or Abbreviated Numbers
that are to be dialed out. These short codes are derived from the Index numbers of the Personal Directory
and the Memory Location Index of the Global Directory.
• You can Quick Dial a number simply by pressing the DSS key.
• The system locates the number to be dialed out in the Personal/Global Directory on the basis of the Index
Number/Memory Location Index configured on the DSS Key.
How to configure
See “Abbreviated Dialing” for instructions on configuring and assigning the Personal and Global Directories.
To assign the Short Codes or Abbreviated Numbers to be used for Quick Dial on DSS keys, for each Extended IP
Phone extension,
• List down the numbers from the Personal Directory and Global Directory to be used for Quick Dial.
• If the number is from the Personal Directory assigned to the extension, note the Index number at which it is
stored in the Personal Directory: 01 to 25.
• If the number is from the Global Directory assigned to the extension, note the Memory Location Index at
which it is stored in the Global Directory: 100 to 999.
• Now, configure the Quick Dial numbers on the DSS keys of the Extended IP Phone.
For instructions on configuring Quick Dial on the Matrix Extended IP Phone, see “Phone Key Settings”
under “Configuring Matrix SPARSH VP248”, “Phone Key Settings” under “Configuring Matrix SPARSH
VP310”, “Phone Key Settings” under “Configuring Matrix SPARSH VP510” and “Phone Key Settings”
under “Configuring Matrix SPARSH VP330”.
• On the desired key, select Quick Dial as Function Type. As Offset, select the Index Number against
which the number is stored in the Personal/Global Directory.
To Next Page
