202 Matrix ETERNITY NE System Manual
Configuring Matrix Extended SPARSH VP710
Extended SPARSH VP710, the Smart Video IP Phone is engineered to offer a contemporary design with crystal-
clear audio and feature-rich capabilities at economical price.This IP Phone is an integration of SPARSH VP710,
android based deskphone with VARTA ADR100 application. To know the list of features supported, refer to
“SARVAM UCS Features supported in Terminals”.
For instructions on how to use Extended SPARSH VP710, refer to the EXTENDED SPARSH VP710 User Guide.
To be able to use SPARSH VP710 - Extended IP Phone, you must configure the following:
• SIP Extension General Parameters, see “Configuring SIP Extension General Parameters”.
• Extended IP Phone Settings, see “Configuring Matrix Extended Phone Settings using Jeeves”.
Configuring Matrix Extended Phone Settings using Jeeves
You can register three Matrix Extended IP Phones/Soft Clients at three different locations as a single SIP
Extension. You can connect/register the same or different types of Extended Phones/Soft Clients —SPARSH
VP248, SPARSH VP310, SPARSH VP510, SPARSH VP330, Matrix Extended SPARSH VP710, Matrix VARTA UC
Clients or MATRIX VARTA WIN200 Desktop UC Client — at each location. In this case we assume that SPARSH
VP510 is connected at Location 1, 2 and 3.
If you want to use more than one Extended SPARSH VP710 IP Phones as a SIP Extension, configure their settings
as Location 1, Location 2 and Location 3.
If you have connected SPARSH VP248 at any of the locations, refer to “Configuring Matrix SPARSH VP248”.
If you have connected SPARSH VP310 at any of the locations, refer to “Configuring Matrix SPARSH VP310”.
If you have connected SPARSH VP330 at any of the locations, refer to “Configuring Matrix SPARSH VP330”.
If you have connected SPARSH VP510 at any of the locations, refer to “Configuring Matrix SPARSH VP510”.
If you have registered Matrix VARTA ADR100 and VARTA AMP100 Mobile UC Clients in any of the locations, refer
to “Configuring Matrix VARTA ADR100/AMP100 UC Clients”.
If you have registered MATRIX VARTA WIN200 UC Client in any of the locations, refer to “Configuring MATRIX
VARTA WIN200 UC Client”.
• Click Device Settings - Location 1 to expand.
To Next Page
