Matrix ETERNITY NE System Manual 905
Handover and Handoff
Handover allows you to move an active VARTA Mobile UC Client call from the Wi-Fi network to the cellular number
(in the cellular network). This is useful when you have an ongoing call and you leave the Wi-Fi network, or if there
are voice quality issues over the Wi-Fi network.
Handoff is when you are back into the Wi-Fi network you can move the call from the cellular number to the VARTA
Mobile UC Client. The call is moved without being disconnected and redialing the number.
SARVAM UCS will serve the Handover request only if:
• the Cellular Number is configured in Application Settings in the Mobile Client. Refer to the respective
Mobile Client User Guide for details.
OR
• the Mobile Number is configured in the system. See “Configuring Matrix VARTA ADR100/AMP100 UC
Clients”.
If the SIP extension user is a VARTA AMP100 client (the application is in the background), Handover will
be possible but Handoff will not be possible.To know more refer to the MATRIX VARTA AMP100 User
Guide.
How to configure
To use this feature, make sure the Basic Features are enabled in the Class of Service assigned to you. For
instructions, see Class of Service in “SIP Extensions”.
To Next Page
