Matrix ETERNITY NE System Manual 1073
• Click SMDR Reports.
•For SMDR - Outgoing Call Report,
• Select the Destination Port.
• In the Destination IP Address, enter the IP Address of the remote Syslog Server. Both IPv4 and IPv6
addresses are supported.
•In Port, enter the port of the remote Syslog Server. Valid port range: 514, 1025 to 65535.
•For SMDR - Incoming Call Report,
• Select the Destination Port.
• In the Destination IP Address, enter the IP Address of the remote Syslog Server.
•In Port, enter the port of the remote Syslog Server. Valid port range: 514, 1025 to 65535.
•For SMDR - Internal Call Report,
• Select the Destination Port.
• In the Destination IP Address, enter the IP Address of the remote Syslog Server.
•In Port, enter the port of the remote Syslog Server. Valid port range: 514, 1025 to 65535.
• Click Submit.
To Next Page
