816 Matrix ETERNITY NE System Manual
If DISA PIN Authentication-Multiple Calls is enabled,
• You will get beeps at the end of music/Built-In Auto Attendant Voice Message.
• Dial DISA Login Code 1079 during the beeps.
• Dial the extension number. You will get beeps.
• Dial the User Password for the extension during the beeps.
• You get feature tone on successful login.
• Dial the special digits #1 to go Off-hook, #0 to go On-hook, and make your calls like any local extension.
For example, making an external call, dial Trunk Access Code '0' to grab a trunk and dial the number.
• To terminate DISA session dial #9 or disconnect the call from your (remote) end.
If DISA CLI Authentication-Multiple Calls is enabled,
• You will get system dial tone at the end of music/Built-In Auto Attendant Voice Message.
• Dial the special digits #1 to go Off-hook, #0 to go On-hook, and make your calls like any local extension.
• To terminate DISA session dial #9 or disconnect the call from your (remote) end.
If DISA CLI Authentication-One Call is enabled,
• You will get Trunk dial tone.
• Dial the external number, without the Trunk Access Code.
• The DISA session will be terminated when you or the remote called party disconnects.
• To make another call, you must dial the number of the DISA enabled trunk again.
The features listed below are not supported in the DISA mode.
• Auto Call Back
• Auto Redial
•Call Park
• Call Chaining
• Self Ring Test
• Trunk Reservation
• Walk-In Class of Service
• Live Call Supervision
To Next Page
