1088 Matrix ETERNITY NE System Manual
• Dial 1072-172-3 to enable Monthly Scheduled Report.
• Dial 1072-172-0 to disable Scheduled Report.
• Exit SA mode.
SARVAM UCS provides a facility to Abort the scheduled report generation midway (1072-171-0). This
aborts the current report generation but does not affect any other scheduled report generation. The
abortion of a report does not affect its consecutive schedule. That is, if a daily report is aborted on Monday,
it does affect the report generation schedule of Tuesday.
Print Filter Settings - Internal Calls
To set Print Filters for Internal Calls,
• Dial the Commands listed in the table for the desired filter.
• Exit SA mode.
Manual Report Generation
• Enter SA mode from SLT/Extended IP phone.
To start/stop Report for Internal Calls:
• Dial 1072-141-1 to start
• Dial 1072-141-0 to stop
• Exit SA mode.
Scheduled Report Generation
• Enter SA mode from SLT/Extended IP phone.
To enable Scheduled Report for Internal Calls:
• Dial 1072-142-1 to enable Daily Scheduled Report.
• Dial 1072-142-2 to enable Weekly Scheduled Report.
• Dial 1072-142-3 to enable Monthly Scheduled Report.
• Dial 1072-142-0 to disable Scheduled Report.
Filter Command Values
Calls with speech duration more
than (seconds)
1072-138-Seconds Seconds: 000-999
Set Time for Scheduled report
Daily
1072-143-HH-MM
HH: 00-23
MM: 00-59
Set Time for Scheduled report
Weekly
1072-144-Day-HH-MM
Day: 1 - 7
HH: 00 - 23
MM: 00 - 59
Set Time for Scheduled report
Monthly
1072-145-Date-HH-MM
Date: 01 - 31
HH: 00 - 23
MM: 00 - 59