Matrix ETERNITY NE System Manual 1149
When the keypad is locked, the features Call Log, Contact, Call Forward, Dynamic Lock, User Status,
DND, Call Cost Display, Hotline, Alarm, Change User Password will not be accessible by the extension
user.
• Click Submit.
To secure an extension using a telephone,
• Enter SA mode from a SLT.
•Dial 1072-013-Extension Number-1 to lock keypad of a SIP extension.
•Dial 1072-013-Extension Number-0 to unlock keypad of a SIP extension.
•Dial 1072-014-Extension Number-0 to change user status to Absent.
•Dial 1072-014-Extension Number-1 to change user status to Present.
• Exit SA mode.
• Extension users can also set their status as 'Absent' or 'Present' from their respective extension
phones. Refer “User Absent/Present”.
• Extended IP Phone extension users can also lock the keypad of their phones from the Phone Menu.
Refer “Extended IP Phone/VARTA UC Client - Operation” for instructions on navigating the phone
menu.
• It is also possible to lock/unlock the Extended IP Phone keypad and set the user extension status as
'Absent'/'Present' from a remote location using “Direct Inward System Access (DISA)”.
FTP Access for Extended IP Phones
The access to the FTP Server of the Extended IP Phones is secured by a password. The FTP password is a code
for preventing unauthorized access. The default FTP Password is 1234. As this password is meant for restricting
access, we strongly recommend you to:
• change the default password.
• make sure the new password is strong and is kept confidential.
• change the password regularly.
The password can be changed using Jeeves only. The password can be a minimum of 6 characters to a maximum
of 12 characters. All ASCII characters (except Percentage %, Hash #, Equal to =, Plus +, And &, Backslash \, Less
than <, Greater than >, Apostrophe ’, Double Quote " and Space) and digits 0 to 9 are allowed. It must include
atleast one upper-case, one lower-case, one number and one special character.
• When you set the System to default, the FTP Password will not be set to default.
• If you use jumpers to restore the default SE Password, the FTP Password will not be set to default.
Changing the FTP Password using Jeeves
• Login as System Engineer.
• Under Advanced Settings, click Password.
To Next Page
