Matrix Telecom ETERNITY NE - Page 1168

1158 Matrix ETERNITY NE System Manual
Call Budget is a cost control feature that allows you to keep a control on the total cost of phone calls made by the
extension users. You may also define the calling permission for extensions and trunks whose allotted budget is
consumed. For more details, see “Call Budget on Extension” and “Call Budget on Trunk”.
Toll Control Levels
For each Toll Control Level from 0 to 3, a 'Call Privilege' is defined. The system applies the Toll Control Level (i.e.
the Call Privilege) set by the extension users themselves or set by the System Administrator/ Operator for the
extensions using Dynamic Lock.
• Toll Control - Level 0 is Time Zone based, wherein you must define the Call Privilege Type for the Day
(Working hours) and the Night/Break (Non-working hours). For instance, you may define 'International
Calls' as Call Privilege for the Day and 'No Calls' as Call Privilege for the Night/Break.
By default, Call Privilege ‘All Calls’ is selected for the Day and Night/Break.
• Toll Control - Level 1 is not based on Time Zones. By default, the Call Privilege Type for this level is
'Local Calls'.
• Toll Control - Level 2 is not based on Time Zones. By default, the Call Privilege type set for this level is
'National Calls'.
• Toll Control - Level 3 is not based on Time Zones. By default, Call Privilege 'No Calls' is selected for this
level.
SARVAM UCS offers you the flexibility to redefine the Call Privilege for each of the above Toll Control Levels
according to the requirements of the extension users.
How it works
• When a call is made, the SARVAM UCS checks the Toll Control Level assigned to the extension making
the call.
• The system checks the 'Call Privilege' programmed in the Toll Control Level of the extension.
• For each call privilege type detected, the system will check the following to determine if call is to be
allowed or denied, as summarized in the table below:
• The Local, Regional, National, International and Limited Calls Number Lists consist of Allowed Numbers
and Denied Numbers.
Type of Call Privilege detected Logic system will check
Local calls Local Number List configured.
Regional calls Regional Number List configured.
National calls National Number List configured.
International calls International Number List configured.
Limited Calls Limited Calls Number List (List 1, 2 or 3) assigned to the extension