Matrix ETERNITY NE System Manual 1209
• If Reminder is not set, the VMS responds with: "Sorry! Your Reminder cannot be set. Please call
Operator for further assistance." VMS further responds with: "Thanks for using this Service."
• Dial # (pound/hash) to cancel Reminder the VMS responds with: "Your Reminder is cancelled."
followed by the prompt: "Thanks for using this Service."
• If no reminder is set, the VMS responds with: "Sorry! There is no Reminder to cancel." followed by the
prompt: "Thanks for using this Service."
Reminders set by Operator
• Enter System Administrator Mode, dialing 1072.
• Dial 1072 to enter SA mode followed by 035 VMS prompts: "Enter the Extension number for which you
have to set or cancel Reminder."
• Dial 1 to select the station user for which the Reminder is to be set. VMS responds with: "Enter the Date in
DD MM YYYY format. To Cancel all Reminders, Press '# (pound/hash)'. For example, To enter Date 17th
March 2008, Dial One Seven Zero Three Two Zero Zero Eight."
• If no date is entered, the VMS prompts: "You have not entered any input."
• If invalid date is entered then VMS prompts: "You have entered invalid input."
• Dial valid date VMS prompts: "Enter the time, HH MM in twenty-four hour format."
• If no time is entered then VMS prompts: "You have not entered any input."
• If invalid time is entered then VMS prompts: "You have entered invalid input."
• Dial valid time VMS prompts: "To set it as Personal, Press 1. To set it as Automated, Press 2."
• Dial 1 VMS responds with: "You have set Personal Reminder for…." followed by the prompt: "To
Confirm
165
, Press 1, To Re-enter, Press 2."
• Dial 1 VMS responds with: "Your Personal Reminder is set." followed by the prompt: Thanks for
using this Service."
• If Reminder is not set, the VMS responds with: "Sorry! Your Reminder cannot be set. Please call
Operator for further assistance." VMS further responds with: "Thanks for using this Service."
OR
• Dial 2 VMS responds with: "You have set Automated Reminder for…." followed by the prompt: "To
Confirm, Press 1, To Re-enter, Press 2."
• Dial 1 VMS responds with: "Your Automated Reminder is set." followed by the prompt: "Thanks for
using this Service."
• If Reminder is not set, VMS responds with: "Sorry! Your Reminder cannot be set. Please call Operator
for further assistance." VMS further responds with: "Thanks for using this Service."
165.This option will not be played, if Alarm Verification is disabled in the System parameters.
To Next Page
