132 Matrix ETERNITY NE System Manual
• Voice Mail: The extension user is greeted by the VMS on answering the alarm call.
• Routing Group: The alarm call is routed to the group of desired extensions configured as the
Operator, so that the alarm request can be served. See “Operator” for instructions.
Default: Voice Message.
COSEC Door Group
You must assign the extension user to a COSEC Door Group for COSEC Integration. The users in the same group
must be assigned the same group. You can create as many as 50 groups numbered from 00 to 50. Users who are
assigned COSEC Door Group ‘00’ are not a part of any group. See “COSEC Integration” for more information.
Station Type
If this is an Operator extension and you want the system to play beeps during a conference to the participants, to
indicate the presence or absence of the Operator, select the Station Type as Assistant.
If this is not an Operator extension, select the Station Type for the SIP Extension as Administration.
Help Desk
Configure this parameter if you want to define the extension as a “Help Desk”.
• Select the Assign Help Desk function to this Extension check box. Default: Disabled.
Forced Account Code
Configure this parameter, if you want to apply the feature Forced Account Code on the extension. When Forced
Account code is enabled, the system will allow the extension user to dial an external number only after the user has
entered the Account Code. To know more, see “Account Codes”.
• Select the Do not allow Outgoing Calls without Account Code check box.
• Click Submit.
Copy Parameter Values
After you have finished configuring this SLT Extension, you may configure the next SLT Extension. To do so,
• Click the tab of the next SLT Extension.
• Follow the same steps as described above to configure another SLT Extension.
OR
You may use the Copy button at the bottom of the page to apply the same SLT Extension settings you configured
for the current extension to another SLT Extension. To do so,
To Next Page
Loading...
