188 Matrix ETERNITY NE System Manual
The phone will enter the Auto Configuration mode, when you assign/re-assign certain features in the key
maps. To know more, refer to the SPARSH VP330 User Guide.
Even if you assign keys for the following feature in the Key Templates, these features will not function:
• If you have completed the configuration of the SPARSH VP330 Phone Settings at Location 1, follow the
same steps as described above to configure the SPARSH VP330 Phone at Location 2 and Location 3.
When you change any of the parameters listed below in the SIP Extension at Location 1, 2, 3, the phone
will go in Auto Configuration mode automatically, if registered:
• Enable SIP Extension
• SIP ID
•Name
• Authentication ID
• Authentication Password
• Authenticate INVITE
• Registrar Server Address
• MAC Address
• Enable Device
• Device Type
• Phone Settings
• Language
• Transport Mode
• Enable SRTP?
• Call Progress Tone
• Date and Time
• Apply Daylight Saving Time?
• Quality of Service (QoS)
Function Type Offset
Macro
SA Command
Special Keys Digit Pause
Digit A
Digit B
Digit C
Digit D
Enter
Local Menu
Feature
Enter SE Programming Mode
Enter SA Programming Mode
Personal Directory Programming
Abbreviated Dialing
Emergency Conference
Self Ring Test
SA Command Prefix
Department Group Call Forward
To Next Page
Loading...
