Matrix ETERNITY NE System Manual 253
SPARSH VP110 Key Settings
• To personalize the key map of the SPARSH VP110, click SPARSH VP110 under Key Template in
Advanced Settings.
Date Display
Format
Select the Date Display Format for the Open
SIP Phone. Default: WWW MMM DD
Matrix SPARSH VP110
Time Display
Format
Select the Time Display Format for the Open
SIP Phone. Default: 24 Hr
Matrix SPARSH VP110
Primary NTP
Server
Select the Primary NTP Server Address with
which you want to synchronize the Date and
Time of the Open SIP Phone. Default: None.
Make sure you configure the desired NTP
Server Address/es in the “Third Party IP-Phone
General Parameters”.
Matrix SPARSH VP110
a. If the Extended IP phone is in the same network (LAN) as SARVAM UCS, select Use Ethernet IP Address as Registrar Server
Address.
If the Extended IP phone is in the Global Network and SARVAM UCS is connected to Internet over Mobile WAN, select Use Mobile
Port IP Address as Registrar Server Address
If the Extended IP Phone is connected in the Global Network and SARVAM UCS is located behind a NAT Router, or STUN is pro-
grammed, select Use Router/STUN's IP Address as Registrar Server Address. Make sure the Router’s Public IP Address is config-
ured in the Network Parameters.
If Dynamic DNS is configured in the Network Parameters, select Use Dynamic DNS Host Name as Registrar Server Address.
If you want SARVAM UCS to assign Registrar Server Address automatically, select Automatic as Registrar Server Address.
b. You can also configure rules for the Dial Plan from each phone. To do so, refer to the SPARSH VP110 User Guide.
c. If an option other than "Do not send" is selected in Local Phone Book, it will overwrite all Local Phone Book's contacts of the phone.
d. To avoid unauthorized access, we recommend you to change the User Password regularly. Make sure it is strong and is kept confi-
dential.
e. To avoid unauthorized access, we recommend you to change the Admin Password regularly. Make sure it is strong and is kept con-
fidential.