602 Matrix ETERNITY NE System Manual
Extension Users using SLT
To set Alarms
• Pick up the handset.
• Dial 161.
• Dial HH:MM
• Dial 1 for Once Only or Dial 2 for Daily.
• You get confirmation tone.
• Replace the handset on the cradle.
To cancel Alarms
• Pick up the handset.
• Dial 161.
•Dial #.
• You get confirmation tone.
• Replace the handset.
• Extension users can set only automated alarms from their phones. For personalized alarms, they must
request the Operator.
• If there are multiple alarms set, alarms cannot be canceled selectively. Only the Operator can cancel
alarms selectively from SA mode.
• Alarms set on an extension will be served, even if DND is also set on the same extension.
Printing Alarm Reports
When Scheduled Alarm Report is enabled and the time is set, the system will automatically print the report at the
set time. The Operator can also print Alarm Status Report any time s/he using SA commands.
The Operator can issue SA commands from Extended IP Phone or a SLT to print Alarm Status Reports.
For Extended IP Phone Users
• Press the key assigned the 'Print Alarm Report' function (if programmed).
OR
•Dial 1072-913.
• You get a confirmatory text message and a confirmation tone.
• Go idle.
For SLT Users
• Pick up the handset.
•Dial 1072-913.
• You get confirmation tone.
• Replace the Handset on the cradle.
To Next Page
