630 Matrix ETERNITY NE System Manual
•In Dialed Number String, configure the numbers you expect the extension users to dial. The Dialed
Numbers can be a maximum of 16 characters. Default: Blank.
When you want to specify number-length without specifying the numeric digits, use the character X to
represent the digit. X represents any number from 0 to 9.
•In Strip Digit, enter the number of digits you want the system to strip off from the Dialed Number String
before dialing out this number. The valid range is from 00 to 16. Default: 0.
•In Add Prefix, enter the number you want the system to add as a prefix to the Dialed Number String
before the system dials out this number. The Prefix can be a maximum of 40 characters. Default: Blank.
• Click Submit.
You may also configure the Automatic Number Translation (ANT) Table on the desired trunks. See Automatic
Number Translation (ANT) under “CO Trunks”, “Mobile Trunks” and “SIP Trunks” for instructions.
To Next Page
Loading...
