Matrix ETERNITY NE System Manual 637
whereas, for SIMCOM-3G engine Cell ID is displayed in decimal digits which ranges from 00000 to
65535.
• BSIC/PCID: In this field, BSIC (Base Station Identification Code) is applicable for GSM whereas PCID
(Physical Cell Identity) is applicable for LTE. BSIC/PCID allows a mobile extension to distinguish
between different neighboring base stations. BSIC/PCID is a three-digit value ranging from 0 to 255.
• BCCH (Broadcast Control Channel): In this field, the BCCH value of the cell is displayed. BCCH
defines the frequency channel number.
• Receive Level: In this field, the Receive Signal Strength level of the cell is displayed. It is the average
Receive Signal Strength of the cell. Its value ranges from -110 dBm to -47 dBm.
• Manual Cell Locking: This radio button is for locking a Mobile Port to a selected cell manually.
Now, to lock a Mobile Port to a particular cell,
• Set the parameter Manual BCCH Locking to Yes.
• Go to the Cell to which you want to lock the Mobile Port.
• Select the radio button Manual Cell Locking of that Cell.
• Click Submit.
• The BCCH Locking for the Mobile Port will appear on this page, if Auto Refresh is enabled.
• If you have stopped Auto Refresh, click Refresh at the bottom of the page to refresh the page and view the
current BCCH Locking settings of the Mobile port.
• You may now log out of Jeeves.
To Next Page
