Matrix Telecom ETERNITY NE - Page 670

660 Matrix ETERNITY NE System Manual
For instructions on assigning a feature to DSS keys, see Phone Key Settings under “Configuring Matrix SPARSH
VP248”, “Configuring Matrix SPARSH VP310”, “Configuring Matrix SPARSH VP510” and “Configuring Matrix
SPARSH VP330”.
To change the Call Park Release Timer, see “System Timers and Counts”.
How to use
For Extended IP Phone Users
• Go OFF-Hook to answer the incoming call.
• The caller requests for an extension/trunk.
• Press DSS Key assigned to Call Chaining.
OR
• Press the ‘Transfer Key’ and dial 1050.
You get confirmation tone and the message 'Party Chained' on your phone's display. If DSS Key is used,
the LED of the key will glow.
• Dial the requested extension/external number.
• You get Ring Back Tone.
• The called party answers.
• Go ON-Hook to transfer the call.
• When extension/trunk disconnects, your extension rings.
• Go OFF Hook. You get connected with the caller.
• Go Idle after the conversation ends, or you get dial tone after 3 seconds.
For SLT Users
• Answer the incoming call.
• The caller requests for an extension/trunk.
• Dial Flash-1050.
• Dial the requested extension/external number.
• You get Ring Back Tone.
• The called party answers.
• Go ON-Hook to transfer call.
• When extension/trunk disconnects, your extension rings.
• Lift handset to answer. You get connected with the caller.
• Go Idle after the conversation ends.