Matrix Telecom ETERNITY NE - Page 74

64 Matrix ETERNITY NE System Manual
DNS Address
• If you select DNS Server as Static, enter the DNS Address here.
To enter dot/period in the IP Address, press the Star ‘*’ key.
DNS Domain Name
• If you select DNS Server as Static, enter the DNS Domain Name here. DNS Domain Name is optional.
PPPoE User ID
• If you have selected PPPoE as Connection Type, you must enter the User ID provided to you by your
Internet Service Provider.
PPPoE Password
• This is the password provided by your Internet Service Provider for the PPPoE User ID. If you have
selected PPPoE as Connection Type, you must enter the password provided by your Internet Service
provider here.
PPPoE Service Name
• If your Internet Service Provider has provided a Service Name, enter the Service Name here. If your
Internet Service Provider has not provided a Service Name, do not configure this parameter.
Primary Server Address
• ETERNITY works as the Auto Configuration Server for the phone. Enter the IP Address or the Dynamic
DNS Domain Name of the Ethernet Port of ETERNITY here. Default: blank.
The phone sends the request for configuration files to this Server Address.
If you have selected DHCP as Connection Type, the phone will get the Primary Server Address and Port
automatically from the DHCP Server. For this, use DHCP option 224 and Data Type as ‘String’ to provide
Server Address and Port from the DHCP Server.
For PPPoE and Static Connection Types, you need to enter the Server Address.
Primary Server Port
• Enter the SPARSH Port of the Ethernet Port of ETERNITY here. The phone sends the request for
configuration files to this port.
Valid range of the port is: 80 or 1025–65535. Default: 80.
Secondary Server Address
• If required, you can also configure the Secondary Sever Address as a fall back option. If the registration
with the Primary Server fails the phone will send the registration and configuration requests to the
Secondary Server Address. Speech-cut or unclear speech may be observed during on-going mature calls.
Secondary Server Port
• Enter the Secondary Server Port. The phone sends the request for configuration files to this port if the
Primary Server fails.
Valid range of the port is: 80 or 1025–65535. Default: 80.