776 Matrix ETERNITY NE System Manual
extensions should be allowed Conversation Recording and enable the Call Recording feature in their
CoS.
For instructions on configuring Conversation Recording related parameters on different extension types,
see “SLT Extensions” and “SIP Extensions” under Basic Settings.
• Extensions that are to be allowed Conversation Recording must also have a mailbox. By default all
extensions are assigned a mailbox in their Voice Mail Settings.
If required, you may disable the Beeps played when Conversation Recording starts. Decide whether you want
Beeps to be played and accordingly enable/disable the Play Beep when Raid/Call Taping/ Conversation
Recording starts in the “System Parameters” under Advanced Settings.
How to use
For Extended IP Phone Users
To record a conversation
• You are in speech with another extension/external number.
• Press DSS Key assigned to Conversation Recording (if programmed).
OR
Press Transfer key and Dial 1095.
• You get beeps (if enabled).
• Speech with party re-established.
• Recording starts.
• Go ON-Hook, after conversation ends.
To listen to a recorded conversation
• Press Voice Mail Key.
OR
Dial 390
128
• Follow Voice Mail Prompts.
•Go Idle.
128. This is the default Voice mail Feature Access Code. If this has been changed, use the new code.