Remote Replication Concepts
T1:configuration net routing> create
T1:configuration net route (uncommitted)> set family=IPv4
family = IPv4 (uncommitted)
T1:configuration net route (uncommitted)> set destination=192.0.2.101
destination = 192.0.2.101 (uncommitted)
T1:configuration net route (uncommitted)> set mask=32
mask = 32 (uncommitted)
T1:configuration net route (uncommitted)> set interface=ixgbe1
interface = ixgbe1 (uncommitted)
T1:configuration net route (uncommitted)> set gateway=192.0.2.1
gateway = 192.0.2.1 (uncommitted)
T1:configuration net route (uncommitted)> commit
T1:configuration net routing> list
ROUTE DESTINATION GATEWAY INTERFACE TYPE STATUS
...
route-003 192.0.2.101/32 192.0.2.1 ixgbe1 static active
4.
Create a replication target on S1.
The following example creates the replication target object on S1 to be used to replicate
project Red from sp1 to tp1:
S1:shares replication targets>target
S1:shares replication target (uncommitted)> set hostname=192.0.2.103
hostname = 192.0.2.103 (uncommitted)
S1:shares replication target (uncommitted)> set label=t1-1
label = t1-1 (uncommitted)
S1:shares replication target (uncommitted)> set root_password=********
root_password = (set) (uncommitted)
S1:shares replication target (uncommitted)> commit
5. Create a replication action for each project.
■
Replicate project Red from pool sp1 to tp1
■
Replicate project Blue from pool sp1 to pool tp2
■
Replicate project Green from pool sp2 to tp2
The following example creates the replication action for project Red:
S1:> shares select Red replication action
S1:shares Red action (uncommitted)> set target=t1-1
target=t1-1 (uncommitted)
S1:shares Red action (uncommitted)> set pool=tp1
538 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
To Next Page
Loading...
Need help?
General
