Oracle ZFS Storage Appliance User Manual

Creating an IPMP Group Using Link-State Only Failure Detection
1.
Create one or more "underlying" IP interfaces that will be used as components
of the IPMP group. Each interface must have an IP address to be used as the
probe source (see separate task to create a single-port interfaces above).
2.
Click the Interface icon.
3.
Optionally change the name of the interface.
4.
Click the IP MultiPathing Group check box.
5.
Click the Use IPv4 Protocol or/and the Use IPv6 Protocol and specify the IP
addresses for the IPMP interface.
6.
Choose the interfaces created in the fist step from the Interfaces list.
7.
Set each chosen interface to be either "Active" or "Standby", as desired.
8.
Click "APPLY".
Creating an IPMP Group Using Link-State Only Failure
Detection
1.
Create one or more "underlying" IP interfaces with the IP address 0.0.0.0/8 to be
used as the components of the IPMP group (see separate task to create a single-
port interfaces above).
2.
Click the Interface icon.
3.
Optionally change the name of the interface.
4.
Click the IP MultiPathing Group check box.
5.
Click the Use IPv4 Protocol or/and the Use IPv6 Protocol and specify the IP
addresses for the IPMP interface.
6.
Choose the interfaces created in the first step from the Interfaces list.
7.
Set each chosen interface to be either "Active" or "Standby", as desired.
8.
Click "APPLY".
64 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest