Oracle ZFS Storage Appliance User Manual

Extending an LACP Aggregation (BUI)
Extending an LACP Aggregation (BUI)
1.
Mouse-over a device in the Devices list.
2.
Click the icon, and drag the device onto an aggregation datalink, and release.
3.
Click "APPLY" at the top of the page to commit this configuration.
Extending an IPMP group (BUI)
1.
Mouse-over an interface in the Interfaces list.
2.
Click the icon, and drag the device onto an IPMP interface, and release.
3.
Click "APPLY" at the top of the page to commit this configuration.
Creating an InfiniBand Partition Datalink and Interface (BUI)
1.
Click the Datalink icon.
2.
Optionally, set name.
3.
Click the IB Partition checkbox.
4.
Choose a device from the Partition Devices list.
5.
Enter a four-digit hexadecimal number for the partition key, which must match
what was configured on the InfiniBand subnet manager.
6.
Choose link mode from the drop down menu.
7.
Click "APPLY". The new partition datalink will appear in the Datalinks list.
8.
Click the Interface icon.
9.
Set desired properties, and choose the datalink previously created.
Configuring the Appliance 65

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest